Radio Control Plane
The AirStrike radio control plane with its classic civil aviation lines, everything you need packaging and super quick assembly time, is a compact, 34-inch wingspan trainer that transports and stores easily.
Produced from durable yet lightweight materials, the AirStrike is made with the strength needed by new pilots.
The Cessna-like high wing design provides a stable, easy-to-control radio control plane, while the included 3 channel 72 MHz transmitter features controls for variable speed, rudder and elevator in the traditional Mode 2 format appreciated by R/C club instructors. And because its electric, the AirStrike can be flown in areas off-limits to large and noisy fuel-powered models!
A rechargeable 8.4 volt battery pack and automatic 12 volt DC peak charger provide the necessary power for clean, quiet and enjoyable flights. The AirStrike radio control plane contains an auto-cutoff circuit that automatically reduces power to the motor when the battery pack nears the end of its charge, while leaving ample reserve radio power for gliding and a successful landing.
A comprehensive owners manual guides you step by step through final assembly, pre-flight checks and first flights. If youve hesitated to try a radio control plane because you thought it was too expensive, think again. Flight School has never been more affordable
FEATURES
- Takes off from the ground
- Reinforced wing to withstand the strength of high aerobatic radio control plane maneuvers
-High torque 5.6 to 1 ratio drives a large & efficient 8.75 x 5.5 inch prop
-Ball-bearing supported main shaft
-Flies up to 3000 ft above sea level
Set includes:
- 3-channel transmitter
- Rechargeable Flight Pack
- DC Peak Detection Quick Charger
SPECIFICATIONS
Length : 28 inches
Wingspan: 34 inches
Weight: 24 OZ
Requires: 8 "aa" Alkaline batteries
On sale here along with other radio control planes!
Radio Control Helicopters
The New Raptor .30 V2 radio control helicopter is the perfect entry-level nitro/gas model which gives the new pilot a stable learning platform while satisfying what the 3D pilots asked for!
The .30 V2 features tough redesigned side frames, reinforced pitch control arm, improved swash plate, new fuel tank, new muffler, and a fresh new look in a colorful body shell.
The rapid cyclic response makes it possible for the radio control helicopter 3D pilot to execute crisp maneuvers like the Tic-Toc, Chaos, Death Spirals, and some we haven't even seen yet!
Add the optional upgrades such as the PV 0379 Auto Rotation Gear and do 3D maneuvers during auto-rotation. Other options include, the all-metal Main Rotor Hub, Main Rotor Grip, and many more.
The RC Discounts Raptor 30 Package includes only the top-of-the-line components:
- Futaba 7 channel transmitter which comes with four digital servos and a PCM receiver
- Raptor 30 ARF 49BB 39H
- GY410 gyro
- Starter Shaft
- Fuel Pump
- Glow Starter with Charger
This is a COMPLETE radio control helicopter kit and comes with everything you need except batteries and fuel.
On sale here along with other radio control helicopters!
Remote Control Cars & Trucks
CEN Racing has changed the nitro sedan remote control car racing world by introducing the all
newly designed Mercedes CT4 S. This State-of-the-art Ready To Run sedan incorporates
months of extensive testing from all parts of the world to bring you the
fastest, most reliable car on the market.
This high-performance Ready-To-Run
nitro sedan is based on the race proven CT4 R race kit design. The CT4S on-track
performance surpasses all other models in its class.
This is the fastest Ready To Run remote control car available, reaching speeds up to 70
MPH out of the box. It's achieved by using our newly engineered huge 2.5 Big
Block 3 ports Lighting engine in conjunction with an adjustable lightweight
2-speed transmission. .21 class engines will bolt directly into the CT4 S.
(Optional parts required)
Many tuning options have been built into the chassis
design to allow the driver to adjust to any track conditions.
Soon we will release a 3-speed conversion kit to increase speed to over
80 MPH !
Features:
- Super solid 3mm hard anodized aluminum chassis - Hard anodized aluminum
upper deck - Adjustable light weight 2 speed
transmission - Adjustable race style oil filled shocks - Front and rear
spider gear differentials- Cutting edge pivot
ball suspension design - Front and rear .080 race style anti-roll bar - High
Flow manifold with racing tuned pipe
Dimensions:- Four Wheel Drive (3 belt drive
train)- Wheel Base: 260mm (10.24")- Width: 196mm (7.72")- Weight: 1900gm
(67.8oz)- Gear Ratio: 6.825/4.875 (1st/2nd gear)- Ground Clearance: 8mm
(0.31")- Tires: 26mm (1.02") x 65mm (2.56")
Chassis:- Type: Double deck aluminum- Bottom
Chassis: 3mm aluminum chassis- Upper Deck: 2mm aluminum plate
Drive Train:- Type: 3 belts, 4-wheel
drive- Transmission: Adjustable shift 2-speed- Differentials: Bevel spider
gears- Clutch: Standard 2 shoe centrifugal clutch with spring- Pipe: CEN composite tuned
racing pipe- Fuel Tank: 75cc tank with stone filter and primer- Final Drive
Ratio: 6.825 (1st) 4.875(2nd)- Belt Tension: Front and side, ball bearing belt
tension kits- Ball Bearings: Full bearing
Suspension:- Type: Pivot ball- DAmpeners:
Lightweight composite oil filled shocks- Camber: Adjustable front and
rear- Caster: Adjustable- Toe-in: Adjustable front and rear- Down Stops:
Fully adjustable ront and rear
Special Features:- Reliable Mirage III pistol grip
radio-High impact foam bumper- Painted
decaled racing bodies
Engine Details- CEN Racing NX-15 Big Block
"Lighting" engine!- Big Block 2.5- 3 Ports- Dual precision crank
bearings- 35000RPM- SG shafts- True ABC construction- Slide Carb.
On sale here along with other RC cars and trucks!
Remote Control Boats
The CR-914 is a 1:25 scale remote control boat based on the Americas Cup sailboat class. It is 36
long and weighs 6 lbs. 4oz. The CR-914 is a strict one-design class sanctioned
by the AMYA (American Model Yachting Association) There have been over five
thousand kits sold and are over 1000 CR-914's registered with the
Class.SPECIFICATIONS:
Dimensions: 36" length by 8" beam
Hull: ABS plastic
Height: Mast 47-3/4"; Total height 60"
Sail area: 549 sq. ins.
Weight: 6.5 lbs.
Draft: 9-1/4"
The main reasons for this growth and popularity as a class within the
AMYA are simple:
The kits comes with everything you need to build it. Minus sandpaper and
paint.
Easy to build; the hull and deck are cast as one piece.
The keel blade and lead bulb are pre-shaped.
The rudder is finished and cast with the shaft installed.
The Keel and rudder are each attached to the sail boat with one nut allowing easy
removal if necessary.
Two piece aluminum mast, including all necessary fittings and sails.
Excellent sailing performance in a wide wind range. With quick acceleration
and turning this remote control boat will thrill and excite the expert as well as the novice.
Radio Control Transmitter/Receiver/Rudder and sail winch servo included.
The CR-914 is beautiful on display, at home on its cradle or hanging on the
wall with the optional mahogany wall mount.
Electronics come with a limited one year warranty
Kit components covered for one year against manufactures defect
CR-914 Complete Kit with electronics:
Includes everything you need to build the boat. One piece Hull/Deck, Keel,
Rudder, Two Channel Radio w/Rudder and Sail Winch servo, Mast, CA Glue, Upgrade
Kit w/new and improved building instructions, West System epoxy, micro balloons,
sails, and a stand.
The only thing you will need is your choice of paint and
batteries ( 12 - AA size Alkaline or NiCad batteries). Average build time is
15-18 hours with the majority of the time spent finishing the hull of this awesome remote control boat.
On sale here along with other remote control boats!
Wednesday, September 24, 2008
Radio control plane at RC Discount Superstore
Radio Control Plane
The AirStrike radio control plane with its classic civil aviation lines, everything you need packaging and super quick assembly time, is a compact, 34-inch wingspan trainer that transports and stores easily.
Produced from durable yet lightweight materials, the AirStrike is made with the strength needed by new pilots.
The Cessna-like high wing design provides a stable, easy-to-control radio control plane, while the included 3 channel 72 MHz transmitter features controls for variable speed, rudder and elevator in the traditional Mode 2 format appreciated by R/C club instructors. And because its electric, the AirStrike can be flown in areas off-limits to large and noisy fuel-powered models!
A rechargeable 8.4 volt battery pack and automatic 12 volt DC peak charger provide the necessary power for clean, quiet and enjoyable flights. The AirStrike radio control plane contains an auto-cutoff circuit that automatically reduces power to the motor when the battery pack nears the end of its charge, while leaving ample reserve radio power for gliding and a successful landing.
A comprehensive owners manual guides you step by step through final assembly, pre-flight checks and first flights. If youve hesitated to try a radio control plane because you thought it was too expensive, think again. Flight School has never been more affordable
FEATURES
- Takes off from the ground
- Reinforced wing to withstand the strength of high aerobatic radio control plane maneuvers
-High torque 5.6 to 1 ratio drives a large & efficient 8.75 x 5.5 inch prop
-Ball-bearing supported main shaft
-Flies up to 3000 ft above sea level
Set includes:
- 3-channel transmitter
- Rechargeable Flight Pack
- DC Peak Detection Quick Charger
SPECIFICATIONS
Length : 28 inches
Wingspan: 34 inches
Weight: 24 OZ
Requires: 8 "aa" Alkaline batteries
On sale here along with other radio control planes!
Radio Control Helicopters
The New Raptor .30 V2 radio control helicopter is the perfect entry-level nitro/gas model which gives the new pilot a stable learning platform while satisfying what the 3D pilots asked for!
The .30 V2 features tough redesigned side frames, reinforced pitch control arm, improved swash plate, new fuel tank, new muffler, and a fresh new look in a colorful body shell.
The rapid cyclic response makes it possible for the radio control helicopter 3D pilot to execute crisp maneuvers like the Tic-Toc, Chaos, Death Spirals, and some we haven't even seen yet!
Add the optional upgrades such as the PV 0379 Auto Rotation Gear and do 3D maneuvers during auto-rotation. Other options include, the all-metal Main Rotor Hub, Main Rotor Grip, and many more.
The RC Discounts Raptor 30 Package includes only the top-of-the-line components:
- Futaba 7 channel transmitter which comes with four digital servos and a PCM receiver
- Raptor 30 ARF 49BB 39H
- GY410 gyro
- Starter Shaft
- Fuel Pump
- Glow Starter with Charger
This is a COMPLETE radio control helicopter kit and comes with everything you need except batteries and fuel.
On sale here along with other radio control helicopters!
Remote Control Cars & Trucks
CEN Racing has changed the nitro sedan remote control car racing world by introducing the all
newly designed Mercedes CT4 S. This State-of-the-art Ready To Run sedan incorporates
months of extensive testing from all parts of the world to bring you the
fastest, most reliable car on the market.
This high-performance Ready-To-Run
nitro sedan is based on the race proven CT4 R race kit design. The CT4S on-track
performance surpasses all other models in its class.
This is the fastest Ready To Run remote control car available, reaching speeds up to 70
MPH out of the box. It's achieved by using our newly engineered huge 2.5 Big
Block 3 ports Lighting engine in conjunction with an adjustable lightweight
2-speed transmission. .21 class engines will bolt directly into the CT4 S.
(Optional parts required)
Many tuning options have been built into the chassis
design to allow the driver to adjust to any track conditions.
Soon we will release a 3-speed conversion kit to increase speed to over
80 MPH !
Features:
- Super solid 3mm hard anodized aluminum chassis - Hard anodized aluminum
upper deck - Adjustable light weight 2 speed
transmission - Adjustable race style oil filled shocks - Front and rear
spider gear differentials- Cutting edge pivot
ball suspension design - Front and rear .080 race style anti-roll bar - High
Flow manifold with racing tuned pipe
Dimensions:- Four Wheel Drive (3 belt drive
train)- Wheel Base: 260mm (10.24")- Width: 196mm (7.72")- Weight: 1900gm
(67.8oz)- Gear Ratio: 6.825/4.875 (1st/2nd gear)- Ground Clearance: 8mm
(0.31")- Tires: 26mm (1.02") x 65mm (2.56")
Chassis:- Type: Double deck aluminum- Bottom
Chassis: 3mm aluminum chassis- Upper Deck: 2mm aluminum plate
Drive Train:- Type: 3 belts, 4-wheel
drive- Transmission: Adjustable shift 2-speed- Differentials: Bevel spider
gears- Clutch: Standard 2 shoe centrifugal clutch with spring- Pipe: CEN composite tuned
racing pipe- Fuel Tank: 75cc tank with stone filter and primer- Final Drive
Ratio: 6.825 (1st) 4.875(2nd)- Belt Tension: Front and side, ball bearing belt
tension kits- Ball Bearings: Full bearing
Suspension:- Type: Pivot ball- DAmpeners:
Lightweight composite oil filled shocks- Camber: Adjustable front and
rear- Caster: Adjustable- Toe-in: Adjustable front and rear- Down Stops:
Fully adjustable ront and rear
Special Features:- Reliable Mirage III pistol grip
radio-High impact foam bumper- Painted
decaled racing bodies
Engine Details- CEN Racing NX-15 Big Block
"Lighting" engine!- Big Block 2.5- 3 Ports- Dual precision crank
bearings- 35000RPM- SG shafts- True ABC construction- Slide Carb.
On sale here along with other RC cars and trucks!
Remote Control Boats
The CR-914 is a 1:25 scale remote control boat based on the Americas Cup sailboat class. It is 36
long and weighs 6 lbs. 4oz. The CR-914 is a strict one-design class sanctioned
by the AMYA (American Model Yachting Association) There have been over five
thousand kits sold and are over 1000 CR-914's registered with the
Class.SPECIFICATIONS:
Dimensions: 36" length by 8" beam
Hull: ABS plastic
Height: Mast 47-3/4"; Total height 60"
Sail area: 549 sq. ins.
Weight: 6.5 lbs.
Draft: 9-1/4"
The main reasons for this growth and popularity as a class within the
AMYA are simple:
The kits comes with everything you need to build it. Minus sandpaper and
paint.
Easy to build; the hull and deck are cast as one piece.
The keel blade and lead bulb are pre-shaped.
The rudder is finished and cast with the shaft installed.
The Keel and rudder are each attached to the sail boat with one nut allowing easy
removal if necessary.
Two piece aluminum mast, including all necessary fittings and sails.
Excellent sailing performance in a wide wind range. With quick acceleration
and turning this remote control boat will thrill and excite the expert as well as the novice.
Radio Control Transmitter/Receiver/Rudder and sail winch servo included.
The CR-914 is beautiful on display, at home on its cradle or hanging on the
wall with the optional mahogany wall mount.
Electronics come with a limited one year warranty
Kit components covered for one year against manufactures defect
CR-914 Complete Kit with electronics:
Includes everything you need to build the boat. One piece Hull/Deck, Keel,
Rudder, Two Channel Radio w/Rudder and Sail Winch servo, Mast, CA Glue, Upgrade
Kit w/new and improved building instructions, West System epoxy, micro balloons,
sails, and a stand.
The only thing you will need is your choice of paint and
batteries ( 12 - AA size Alkaline or NiCad batteries). Average build time is
15-18 hours with the majority of the time spent finishing the hull of this awesome remote control boat.
On sale here along with other remote control boats!
The AirStrike radio control plane with its classic civil aviation lines, everything you need packaging and super quick assembly time, is a compact, 34-inch wingspan trainer that transports and stores easily.
Produced from durable yet lightweight materials, the AirStrike is made with the strength needed by new pilots.
The Cessna-like high wing design provides a stable, easy-to-control radio control plane, while the included 3 channel 72 MHz transmitter features controls for variable speed, rudder and elevator in the traditional Mode 2 format appreciated by R/C club instructors. And because its electric, the AirStrike can be flown in areas off-limits to large and noisy fuel-powered models!
A rechargeable 8.4 volt battery pack and automatic 12 volt DC peak charger provide the necessary power for clean, quiet and enjoyable flights. The AirStrike radio control plane contains an auto-cutoff circuit that automatically reduces power to the motor when the battery pack nears the end of its charge, while leaving ample reserve radio power for gliding and a successful landing.
A comprehensive owners manual guides you step by step through final assembly, pre-flight checks and first flights. If youve hesitated to try a radio control plane because you thought it was too expensive, think again. Flight School has never been more affordable
FEATURES
- Takes off from the ground
- Reinforced wing to withstand the strength of high aerobatic radio control plane maneuvers
-High torque 5.6 to 1 ratio drives a large & efficient 8.75 x 5.5 inch prop
-Ball-bearing supported main shaft
-Flies up to 3000 ft above sea level
Set includes:
- 3-channel transmitter
- Rechargeable Flight Pack
- DC Peak Detection Quick Charger
SPECIFICATIONS
Length : 28 inches
Wingspan: 34 inches
Weight: 24 OZ
Requires: 8 "aa" Alkaline batteries
On sale here along with other radio control planes!
Radio Control Helicopters
The New Raptor .30 V2 radio control helicopter is the perfect entry-level nitro/gas model which gives the new pilot a stable learning platform while satisfying what the 3D pilots asked for!
The .30 V2 features tough redesigned side frames, reinforced pitch control arm, improved swash plate, new fuel tank, new muffler, and a fresh new look in a colorful body shell.
The rapid cyclic response makes it possible for the radio control helicopter 3D pilot to execute crisp maneuvers like the Tic-Toc, Chaos, Death Spirals, and some we haven't even seen yet!
Add the optional upgrades such as the PV 0379 Auto Rotation Gear and do 3D maneuvers during auto-rotation. Other options include, the all-metal Main Rotor Hub, Main Rotor Grip, and many more.
The RC Discounts Raptor 30 Package includes only the top-of-the-line components:
- Futaba 7 channel transmitter which comes with four digital servos and a PCM receiver
- Raptor 30 ARF 49BB 39H
- GY410 gyro
- Starter Shaft
- Fuel Pump
- Glow Starter with Charger
This is a COMPLETE radio control helicopter kit and comes with everything you need except batteries and fuel.
On sale here along with other radio control helicopters!
Remote Control Cars & Trucks
CEN Racing has changed the nitro sedan remote control car racing world by introducing the all
newly designed Mercedes CT4 S. This State-of-the-art Ready To Run sedan incorporates
months of extensive testing from all parts of the world to bring you the
fastest, most reliable car on the market.
This high-performance Ready-To-Run
nitro sedan is based on the race proven CT4 R race kit design. The CT4S on-track
performance surpasses all other models in its class.
This is the fastest Ready To Run remote control car available, reaching speeds up to 70
MPH out of the box. It's achieved by using our newly engineered huge 2.5 Big
Block 3 ports Lighting engine in conjunction with an adjustable lightweight
2-speed transmission. .21 class engines will bolt directly into the CT4 S.
(Optional parts required)
Many tuning options have been built into the chassis
design to allow the driver to adjust to any track conditions.
Soon we will release a 3-speed conversion kit to increase speed to over
80 MPH !
Features:
- Super solid 3mm hard anodized aluminum chassis - Hard anodized aluminum
upper deck - Adjustable light weight 2 speed
transmission - Adjustable race style oil filled shocks - Front and rear
spider gear differentials- Cutting edge pivot
ball suspension design - Front and rear .080 race style anti-roll bar - High
Flow manifold with racing tuned pipe
Dimensions:- Four Wheel Drive (3 belt drive
train)- Wheel Base: 260mm (10.24")- Width: 196mm (7.72")- Weight: 1900gm
(67.8oz)- Gear Ratio: 6.825/4.875 (1st/2nd gear)- Ground Clearance: 8mm
(0.31")- Tires: 26mm (1.02") x 65mm (2.56")
Chassis:- Type: Double deck aluminum- Bottom
Chassis: 3mm aluminum chassis- Upper Deck: 2mm aluminum plate
Drive Train:- Type: 3 belts, 4-wheel
drive- Transmission: Adjustable shift 2-speed- Differentials: Bevel spider
gears- Clutch: Standard 2 shoe centrifugal clutch with spring- Pipe: CEN composite tuned
racing pipe- Fuel Tank: 75cc tank with stone filter and primer- Final Drive
Ratio: 6.825 (1st) 4.875(2nd)- Belt Tension: Front and side, ball bearing belt
tension kits- Ball Bearings: Full bearing
Suspension:- Type: Pivot ball- DAmpeners:
Lightweight composite oil filled shocks- Camber: Adjustable front and
rear- Caster: Adjustable- Toe-in: Adjustable front and rear- Down Stops:
Fully adjustable ront and rear
Special Features:- Reliable Mirage III pistol grip
radio-High impact foam bumper- Painted
decaled racing bodies
Engine Details- CEN Racing NX-15 Big Block
"Lighting" engine!- Big Block 2.5- 3 Ports- Dual precision crank
bearings- 35000RPM- SG shafts- True ABC construction- Slide Carb.
On sale here along with other RC cars and trucks!
Remote Control Boats
The CR-914 is a 1:25 scale remote control boat based on the Americas Cup sailboat class. It is 36
long and weighs 6 lbs. 4oz. The CR-914 is a strict one-design class sanctioned
by the AMYA (American Model Yachting Association) There have been over five
thousand kits sold and are over 1000 CR-914's registered with the
Class.SPECIFICATIONS:
Dimensions: 36" length by 8" beam
Hull: ABS plastic
Height: Mast 47-3/4"; Total height 60"
Sail area: 549 sq. ins.
Weight: 6.5 lbs.
Draft: 9-1/4"
The main reasons for this growth and popularity as a class within the
AMYA are simple:
The kits comes with everything you need to build it. Minus sandpaper and
paint.
Easy to build; the hull and deck are cast as one piece.
The keel blade and lead bulb are pre-shaped.
The rudder is finished and cast with the shaft installed.
The Keel and rudder are each attached to the sail boat with one nut allowing easy
removal if necessary.
Two piece aluminum mast, including all necessary fittings and sails.
Excellent sailing performance in a wide wind range. With quick acceleration
and turning this remote control boat will thrill and excite the expert as well as the novice.
Radio Control Transmitter/Receiver/Rudder and sail winch servo included.
The CR-914 is beautiful on display, at home on its cradle or hanging on the
wall with the optional mahogany wall mount.
Electronics come with a limited one year warranty
Kit components covered for one year against manufactures defect
CR-914 Complete Kit with electronics:
Includes everything you need to build the boat. One piece Hull/Deck, Keel,
Rudder, Two Channel Radio w/Rudder and Sail Winch servo, Mast, CA Glue, Upgrade
Kit w/new and improved building instructions, West System epoxy, micro balloons,
sails, and a stand.
The only thing you will need is your choice of paint and
batteries ( 12 - AA size Alkaline or NiCad batteries). Average build time is
15-18 hours with the majority of the time spent finishing the hull of this awesome remote control boat.
On sale here along with other remote control boats!
Radio control plane at RC Discount Superstore
Radio Control Plane
The AirStrike radio control plane with its classic civil aviation lines, everything you need packaging and super quick assembly time, is a compact, 34-inch wingspan trainer that transports and stores easily.
Produced from durable yet lightweight materials, the AirStrike is made with the strength needed by new pilots.
The Cessna-like high wing design provides a stable, easy-to-control radio control plane, while the included 3 channel 72 MHz transmitter features controls for variable speed, rudder and elevator in the traditional Mode 2 format appreciated by R/C club instructors. And because its electric, the AirStrike can be flown in areas off-limits to large and noisy fuel-powered models!
A rechargeable 8.4 volt battery pack and automatic 12 volt DC peak charger provide the necessary power for clean, quiet and enjoyable flights. The AirStrike radio control plane contains an auto-cutoff circuit that automatically reduces power to the motor when the battery pack nears the end of its charge, while leaving ample reserve radio power for gliding and a successful landing.
A comprehensive owners manual guides you step by step through final assembly, pre-flight checks and first flights. If youve hesitated to try a radio control plane because you thought it was too expensive, think again. Flight School has never been more affordable
FEATURES
- Takes off from the ground
- Reinforced wing to withstand the strength of high aerobatic radio control plane maneuvers
-High torque 5.6 to 1 ratio drives a large & efficient 8.75 x 5.5 inch prop
-Ball-bearing supported main shaft
-Flies up to 3000 ft above sea level
Set includes:
- 3-channel transmitter
- Rechargeable Flight Pack
- DC Peak Detection Quick Charger
SPECIFICATIONS
Length : 28 inches
Wingspan: 34 inches
Weight: 24 OZ
Requires: 8 "aa" Alkaline batteries
On sale here along with other radio control planes!
Radio Control Helicopters
The New Raptor .30 V2 radio control helicopter is the perfect entry-level nitro/gas model which gives the new pilot a stable learning platform while satisfying what the 3D pilots asked for!
The .30 V2 features tough redesigned side frames, reinforced pitch control arm, improved swash plate, new fuel tank, new muffler, and a fresh new look in a colorful body shell.
The rapid cyclic response makes it possible for the radio control helicopter 3D pilot to execute crisp maneuvers like the Tic-Toc, Chaos, Death Spirals, and some we haven't even seen yet!
Add the optional upgrades such as the PV 0379 Auto Rotation Gear and do 3D maneuvers during auto-rotation. Other options include, the all-metal Main Rotor Hub, Main Rotor Grip, and many more.
The RC Discounts Raptor 30 Package includes only the top-of-the-line components:
- Futaba 7 channel transmitter which comes with four digital servos and a PCM receiver
- Raptor 30 ARF 49BB 39H
- GY410 gyro
- Starter Shaft
- Fuel Pump
- Glow Starter with Charger
This is a COMPLETE radio control helicopter kit and comes with everything you need except batteries and fuel.
On sale here along with other radio control helicopters!
Remote Control Cars & Trucks
CEN Racing has changed the nitro sedan remote control car racing world by introducing the all
newly designed Mercedes CT4 S. This State-of-the-art Ready To Run sedan incorporates
months of extensive testing from all parts of the world to bring you the
fastest, most reliable car on the market.
This high-performance Ready-To-Run
nitro sedan is based on the race proven CT4 R race kit design. The CT4S on-track
performance surpasses all other models in its class.
This is the fastest Ready To Run remote control car available, reaching speeds up to 70
MPH out of the box. It's achieved by using our newly engineered huge 2.5 Big
Block 3 ports Lighting engine in conjunction with an adjustable lightweight
2-speed transmission. .21 class engines will bolt directly into the CT4 S.
(Optional parts required)
Many tuning options have been built into the chassis
design to allow the driver to adjust to any track conditions.
Soon we will release a 3-speed conversion kit to increase speed to over
80 MPH !
Features:
- Super solid 3mm hard anodized aluminum chassis - Hard anodized aluminum
upper deck - Adjustable light weight 2 speed
transmission - Adjustable race style oil filled shocks - Front and rear
spider gear differentials- Cutting edge pivot
ball suspension design - Front and rear .080 race style anti-roll bar - High
Flow manifold with racing tuned pipe
Dimensions:- Four Wheel Drive (3 belt drive
train)- Wheel Base: 260mm (10.24")- Width: 196mm (7.72")- Weight: 1900gm
(67.8oz)- Gear Ratio: 6.825/4.875 (1st/2nd gear)- Ground Clearance: 8mm
(0.31")- Tires: 26mm (1.02") x 65mm (2.56")
Chassis:- Type: Double deck aluminum- Bottom
Chassis: 3mm aluminum chassis- Upper Deck: 2mm aluminum plate
Drive Train:- Type: 3 belts, 4-wheel
drive- Transmission: Adjustable shift 2-speed- Differentials: Bevel spider
gears- Clutch: Standard 2 shoe centrifugal clutch with spring- Pipe: CEN composite tuned
racing pipe- Fuel Tank: 75cc tank with stone filter and primer- Final Drive
Ratio: 6.825 (1st) 4.875(2nd)- Belt Tension: Front and side, ball bearing belt
tension kits- Ball Bearings: Full bearing
Suspension:- Type: Pivot ball- DAmpeners:
Lightweight composite oil filled shocks- Camber: Adjustable front and
rear- Caster: Adjustable- Toe-in: Adjustable front and rear- Down Stops:
Fully adjustable ront and rear
Special Features:- Reliable Mirage III pistol grip
radio-High impact foam bumper- Painted
decaled racing bodies
Engine Details- CEN Racing NX-15 Big Block
"Lighting" engine!- Big Block 2.5- 3 Ports- Dual precision crank
bearings- 35000RPM- SG shafts- True ABC construction- Slide Carb.
On sale here along with other RC cars and trucks!
Remote Control Boats
The CR-914 is a 1:25 scale remote control boat based on the Americas Cup sailboat class. It is 36
long and weighs 6 lbs. 4oz. The CR-914 is a strict one-design class sanctioned
by the AMYA (American Model Yachting Association) There have been over five
thousand kits sold and are over 1000 CR-914's registered with the
Class.SPECIFICATIONS:
Dimensions: 36" length by 8" beam
Hull: ABS plastic
Height: Mast 47-3/4"; Total height 60"
Sail area: 549 sq. ins.
Weight: 6.5 lbs.
Draft: 9-1/4"
The main reasons for this growth and popularity as a class within the
AMYA are simple:
The kits comes with everything you need to build it. Minus sandpaper and
paint.
Easy to build; the hull and deck are cast as one piece.
The keel blade and lead bulb are pre-shaped.
The rudder is finished and cast with the shaft installed.
The Keel and rudder are each attached to the sail boat with one nut allowing easy
removal if necessary.
Two piece aluminum mast, including all necessary fittings and sails.
Excellent sailing performance in a wide wind range. With quick acceleration
and turning this remote control boat will thrill and excite the expert as well as the novice.
Radio Control Transmitter/Receiver/Rudder and sail winch servo included.
The CR-914 is beautiful on display, at home on its cradle or hanging on the
wall with the optional mahogany wall mount.
Electronics come with a limited one year warranty
Kit components covered for one year against manufactures defect
CR-914 Complete Kit with electronics:
Includes everything you need to build the boat. One piece Hull/Deck, Keel,
Rudder, Two Channel Radio w/Rudder and Sail Winch servo, Mast, CA Glue, Upgrade
Kit w/new and improved building instructions, West System epoxy, micro balloons,
sails, and a stand.
The only thing you will need is your choice of paint and
batteries ( 12 - AA size Alkaline or NiCad batteries). Average build time is
15-18 hours with the majority of the time spent finishing the hull of this awesome remote control boat.
On sale here along with other remote control boats!
The AirStrike radio control plane with its classic civil aviation lines, everything you need packaging and super quick assembly time, is a compact, 34-inch wingspan trainer that transports and stores easily.
Produced from durable yet lightweight materials, the AirStrike is made with the strength needed by new pilots.
The Cessna-like high wing design provides a stable, easy-to-control radio control plane, while the included 3 channel 72 MHz transmitter features controls for variable speed, rudder and elevator in the traditional Mode 2 format appreciated by R/C club instructors. And because its electric, the AirStrike can be flown in areas off-limits to large and noisy fuel-powered models!
A rechargeable 8.4 volt battery pack and automatic 12 volt DC peak charger provide the necessary power for clean, quiet and enjoyable flights. The AirStrike radio control plane contains an auto-cutoff circuit that automatically reduces power to the motor when the battery pack nears the end of its charge, while leaving ample reserve radio power for gliding and a successful landing.
A comprehensive owners manual guides you step by step through final assembly, pre-flight checks and first flights. If youve hesitated to try a radio control plane because you thought it was too expensive, think again. Flight School has never been more affordable
FEATURES
- Takes off from the ground
- Reinforced wing to withstand the strength of high aerobatic radio control plane maneuvers
-High torque 5.6 to 1 ratio drives a large & efficient 8.75 x 5.5 inch prop
-Ball-bearing supported main shaft
-Flies up to 3000 ft above sea level
Set includes:
- 3-channel transmitter
- Rechargeable Flight Pack
- DC Peak Detection Quick Charger
SPECIFICATIONS
Length : 28 inches
Wingspan: 34 inches
Weight: 24 OZ
Requires: 8 "aa" Alkaline batteries
On sale here along with other radio control planes!
Radio Control Helicopters
The New Raptor .30 V2 radio control helicopter is the perfect entry-level nitro/gas model which gives the new pilot a stable learning platform while satisfying what the 3D pilots asked for!
The .30 V2 features tough redesigned side frames, reinforced pitch control arm, improved swash plate, new fuel tank, new muffler, and a fresh new look in a colorful body shell.
The rapid cyclic response makes it possible for the radio control helicopter 3D pilot to execute crisp maneuvers like the Tic-Toc, Chaos, Death Spirals, and some we haven't even seen yet!
Add the optional upgrades such as the PV 0379 Auto Rotation Gear and do 3D maneuvers during auto-rotation. Other options include, the all-metal Main Rotor Hub, Main Rotor Grip, and many more.
The RC Discounts Raptor 30 Package includes only the top-of-the-line components:
- Futaba 7 channel transmitter which comes with four digital servos and a PCM receiver
- Raptor 30 ARF 49BB 39H
- GY410 gyro
- Starter Shaft
- Fuel Pump
- Glow Starter with Charger
This is a COMPLETE radio control helicopter kit and comes with everything you need except batteries and fuel.
On sale here along with other radio control helicopters!
Remote Control Cars & Trucks
CEN Racing has changed the nitro sedan remote control car racing world by introducing the all
newly designed Mercedes CT4 S. This State-of-the-art Ready To Run sedan incorporates
months of extensive testing from all parts of the world to bring you the
fastest, most reliable car on the market.
This high-performance Ready-To-Run
nitro sedan is based on the race proven CT4 R race kit design. The CT4S on-track
performance surpasses all other models in its class.
This is the fastest Ready To Run remote control car available, reaching speeds up to 70
MPH out of the box. It's achieved by using our newly engineered huge 2.5 Big
Block 3 ports Lighting engine in conjunction with an adjustable lightweight
2-speed transmission. .21 class engines will bolt directly into the CT4 S.
(Optional parts required)
Many tuning options have been built into the chassis
design to allow the driver to adjust to any track conditions.
Soon we will release a 3-speed conversion kit to increase speed to over
80 MPH !
Features:
- Super solid 3mm hard anodized aluminum chassis - Hard anodized aluminum
upper deck - Adjustable light weight 2 speed
transmission - Adjustable race style oil filled shocks - Front and rear
spider gear differentials- Cutting edge pivot
ball suspension design - Front and rear .080 race style anti-roll bar - High
Flow manifold with racing tuned pipe
Dimensions:- Four Wheel Drive (3 belt drive
train)- Wheel Base: 260mm (10.24")- Width: 196mm (7.72")- Weight: 1900gm
(67.8oz)- Gear Ratio: 6.825/4.875 (1st/2nd gear)- Ground Clearance: 8mm
(0.31")- Tires: 26mm (1.02") x 65mm (2.56")
Chassis:- Type: Double deck aluminum- Bottom
Chassis: 3mm aluminum chassis- Upper Deck: 2mm aluminum plate
Drive Train:- Type: 3 belts, 4-wheel
drive- Transmission: Adjustable shift 2-speed- Differentials: Bevel spider
gears- Clutch: Standard 2 shoe centrifugal clutch with spring- Pipe: CEN composite tuned
racing pipe- Fuel Tank: 75cc tank with stone filter and primer- Final Drive
Ratio: 6.825 (1st) 4.875(2nd)- Belt Tension: Front and side, ball bearing belt
tension kits- Ball Bearings: Full bearing
Suspension:- Type: Pivot ball- DAmpeners:
Lightweight composite oil filled shocks- Camber: Adjustable front and
rear- Caster: Adjustable- Toe-in: Adjustable front and rear- Down Stops:
Fully adjustable ront and rear
Special Features:- Reliable Mirage III pistol grip
radio-High impact foam bumper- Painted
decaled racing bodies
Engine Details- CEN Racing NX-15 Big Block
"Lighting" engine!- Big Block 2.5- 3 Ports- Dual precision crank
bearings- 35000RPM- SG shafts- True ABC construction- Slide Carb.
On sale here along with other RC cars and trucks!
Remote Control Boats
The CR-914 is a 1:25 scale remote control boat based on the Americas Cup sailboat class. It is 36
long and weighs 6 lbs. 4oz. The CR-914 is a strict one-design class sanctioned
by the AMYA (American Model Yachting Association) There have been over five
thousand kits sold and are over 1000 CR-914's registered with the
Class.SPECIFICATIONS:
Dimensions: 36" length by 8" beam
Hull: ABS plastic
Height: Mast 47-3/4"; Total height 60"
Sail area: 549 sq. ins.
Weight: 6.5 lbs.
Draft: 9-1/4"
The main reasons for this growth and popularity as a class within the
AMYA are simple:
The kits comes with everything you need to build it. Minus sandpaper and
paint.
Easy to build; the hull and deck are cast as one piece.
The keel blade and lead bulb are pre-shaped.
The rudder is finished and cast with the shaft installed.
The Keel and rudder are each attached to the sail boat with one nut allowing easy
removal if necessary.
Two piece aluminum mast, including all necessary fittings and sails.
Excellent sailing performance in a wide wind range. With quick acceleration
and turning this remote control boat will thrill and excite the expert as well as the novice.
Radio Control Transmitter/Receiver/Rudder and sail winch servo included.
The CR-914 is beautiful on display, at home on its cradle or hanging on the
wall with the optional mahogany wall mount.
Electronics come with a limited one year warranty
Kit components covered for one year against manufactures defect
CR-914 Complete Kit with electronics:
Includes everything you need to build the boat. One piece Hull/Deck, Keel,
Rudder, Two Channel Radio w/Rudder and Sail Winch servo, Mast, CA Glue, Upgrade
Kit w/new and improved building instructions, West System epoxy, micro balloons,
sails, and a stand.
The only thing you will need is your choice of paint and
batteries ( 12 - AA size Alkaline or NiCad batteries). Average build time is
15-18 hours with the majority of the time spent finishing the hull of this awesome remote control boat.
On sale here along with other remote control boats!
Tuesday, September 23, 2008
Hovercraft RC Introduction
All About Hovercraft RC
(Some links open new windows)
Hovercraft RC
are also sometimes called Air Cushion Vehicles or ACV. They can fliy like a plane but can float like a boat and can drive on land like a car all the while traversing ditches and small gullies. A thrust propeller pushes the craft forward on its bubble' of air. Rudders, like on an airplane, steer the direction of the craft.
This all applies to remote control hovercraft as well as the real thing. Needless to say, it's a unique method of transportation and an exciting hobby too!
The idea for a hovercraft is attributed to Christopher Cockerell (later knighted Sir Christopher for inventing the Hovercraft) when he was working with small boats.
Today they are used for many applications where people or equipment need to travel at high speed over water but be able to load and unload on land.
The hovercraft RC engine provides the power to drive large fans that blow air under the craft and the air is trapped by a rubber skirt that enables it to travel over a wide range of terrain.
Hovercraft RC, or remote control hovercraft have, until recently, been built by a small group of keen modelers but lately the hobby has become much more popular.
Model hovercraft, like many other RC models such as boats, airplanes, cars and helicopters, offer some problems in terms of scaling and operation when reduced from their full operating size.
The general operating principles remain the same but some modifications in the skirt arrangement are needed to make a successful remote control hovercraft replica of the original.
With hovercraft RC, the size of objects encountered on land and the wave size on water are two major problems when scaling model hovercraft. With gas engine driven craft there is also the added problems of water spray and dust, which will choke an engine and cause many running problems. The water poses a similar problem for electric powered remote control hovercraft.
Single engine hovercraft RC use one engine to provide thrust and lift for the craft with the air being split into two flows. About 30% of the air is used under the craft for lift and the rest of the air exits the rear of the craft over a rudder and provides thrust.
This creates simple model hovercrafts with the advantage that they can be controlled from a low cost 2-channel radio control system.
Twin engine model hovercrafts provide one engine for lift and one for thrust. The engines can operate independently and therefore require at least a 3-channel radio system.
The lift motor can be set using one throttle setting and the thrust controlled independently from another radio control channel. This type of hovercraft RC model generally provides better performance in terms of the height it can hover and the speed it can achieve.
We hope you find this information interesting and above all helpful while you research the exciting and unique hobby of hovercraft RC.
(Some links open new windows)
Hovercraft RC
are also sometimes called Air Cushion Vehicles or ACV. They can fliy like a plane but can float like a boat and can drive on land like a car all the while traversing ditches and small gullies. A thrust propeller pushes the craft forward on its bubble' of air. Rudders, like on an airplane, steer the direction of the craft.
This all applies to remote control hovercraft as well as the real thing. Needless to say, it's a unique method of transportation and an exciting hobby too!
The idea for a hovercraft is attributed to Christopher Cockerell (later knighted Sir Christopher for inventing the Hovercraft) when he was working with small boats.
Today they are used for many applications where people or equipment need to travel at high speed over water but be able to load and unload on land.
The hovercraft RC engine provides the power to drive large fans that blow air under the craft and the air is trapped by a rubber skirt that enables it to travel over a wide range of terrain.
Hovercraft RC, or remote control hovercraft have, until recently, been built by a small group of keen modelers but lately the hobby has become much more popular.
Model hovercraft, like many other RC models such as boats, airplanes, cars and helicopters, offer some problems in terms of scaling and operation when reduced from their full operating size.
The general operating principles remain the same but some modifications in the skirt arrangement are needed to make a successful remote control hovercraft replica of the original.
With hovercraft RC, the size of objects encountered on land and the wave size on water are two major problems when scaling model hovercraft. With gas engine driven craft there is also the added problems of water spray and dust, which will choke an engine and cause many running problems. The water poses a similar problem for electric powered remote control hovercraft.
Single engine hovercraft RC use one engine to provide thrust and lift for the craft with the air being split into two flows. About 30% of the air is used under the craft for lift and the rest of the air exits the rear of the craft over a rudder and provides thrust.
This creates simple model hovercrafts with the advantage that they can be controlled from a low cost 2-channel radio control system.
Twin engine model hovercrafts provide one engine for lift and one for thrust. The engines can operate independently and therefore require at least a 3-channel radio system.
The lift motor can be set using one throttle setting and the thrust controlled independently from another radio control channel. This type of hovercraft RC model generally provides better performance in terms of the height it can hover and the speed it can achieve.
We hope you find this information interesting and above all helpful while you research the exciting and unique hobby of hovercraft RC.
Thursday, September 4, 2008
Franked or Free Congressional Mail Privileges
Franking, Franked or Frank is derived from the Latin word "francus" meaning free. Franked or free mailing of letters made their legal appearance in the United State on November 8, 1775, when the Continental Congress decided to give its membership the privilege of sending mail, free of charge, via a resolution that read: On motion made, resolved that all letters to and from the delegates of the United Colonies, during the sessions of Congress pass, and shall be carried free of postage, the members having engaged upon their honor not to frank or enclose any letter but their own. In place of a postage stamp, every piece of mail was to bears the registered signature or "the frank", of the congressman or senator and that means the USPS was to deliver mail at no cost to him. The first U.S. Congress enacted a franking law in 1789. At various times addition persons in the employ of the government were extended the privileges of free mail, including the President, the Vice-President, and the Cabinet officials. Because the privilege was most likely abused "Franking" was often called the "Franklin Privilege" while Benjamin Franklin was the U.S. Postmaster General. Franked mail covers are a popular stamp collectors item. That is, there are collectors who want franked letters of the Presidents, his Cabinet Officers, Generals and other important officials such as Congressmen and Senators. Stamp collectors and Autograph collectors are looking for the VIP signatures on these franked covers. Possibly the best use of the Franking privilege was during war time when Soldiers, Sailors, Airmen and Marines were allowed to send mail home to their loved one's by simply writing "Free" where the stamp would normally go on a letter. I assume and hope that this franking privilege is being done today by our military in Iraq and Afghanistan. Over the last 200 years U.S. Franked Mail Covers have been a popular Stamp and Autograph collectible. Check out our new shopping website http://www.LunchTimeShopper.com where you can find what you want in 30 minutes or less! Including a large selection of Congressional franking mail covers.
Wednesday, September 3, 2008
Small flashlight
Roll of absorbent cotton
Some cotton balls
Clean, white cotton sock (to cover wounded paws)
Gauze pads
Tape
Small scissors with rounded tips
Tweezers
Instant ice pack
Bulb syringe for suctioning mucous from mouth or nose
Injection syringe without the needle (to give liquid medication)
Small flashlight
All of these things should fit neatly into a container that has a nice tight lid. This will help to keep everything clean and sterile no matter how long it is sitting on the shelf or in the car. It is also a good idea to have the name of the vet and his or her phone number right there on the lid so that even in a panic you will know what to do. You may even want to put the number of the local emergency animal hospital as well in case something happens early in the morning or late at night when the regular vets are all closed.
Bee stings are one of the most common of all dog injuries. It is important that you get the stinger out right away before an infection has time to set in. This will also help to minimize any pain that your dog may be in. If you have to, restrain your dog and then use the tweezers in the first aid kit to pull out the stinger. You can then wash the area with some luke warm water and baking soda. This can help to take some of the nasty stinging away and easy the pain suffered by your dog. Ice and Benadryl will also help to keep the pain and swelling to a minimum, just make sure that you ask the vet just how much Benadryl is enough for your dog. Just like kids it is important that dogs get the right dosage when they take medications.
Some cotton balls
Clean, white cotton sock (to cover wounded paws)
Gauze pads
Tape
Small scissors with rounded tips
Tweezers
Instant ice pack
Bulb syringe for suctioning mucous from mouth or nose
Injection syringe without the needle (to give liquid medication)
Small flashlight
All of these things should fit neatly into a container that has a nice tight lid. This will help to keep everything clean and sterile no matter how long it is sitting on the shelf or in the car. It is also a good idea to have the name of the vet and his or her phone number right there on the lid so that even in a panic you will know what to do. You may even want to put the number of the local emergency animal hospital as well in case something happens early in the morning or late at night when the regular vets are all closed.
Bee stings are one of the most common of all dog injuries. It is important that you get the stinger out right away before an infection has time to set in. This will also help to minimize any pain that your dog may be in. If you have to, restrain your dog and then use the tweezers in the first aid kit to pull out the stinger. You can then wash the area with some luke warm water and baking soda. This can help to take some of the nasty stinging away and easy the pain suffered by your dog. Ice and Benadryl will also help to keep the pain and swelling to a minimum, just make sure that you ask the vet just how much Benadryl is enough for your dog. Just like kids it is important that dogs get the right dosage when they take medications.
LED bulb in the Coast LED lenser lantern
The Lenser Briefcase is an economical but considerate gift for the outdoor enthusiast. With a variety of LED flashlights and torches, there are enough lights to have one placed everywhere you dad may need one - on a key chain, beside the bed, in the garage, in the car or truck, with the tackle box or in with the hunting gear. The LED Lenser briefcase set includes an easy to carry, compact briefcase so that the lights can be kept together when not in use or if you want to travel with them. If the LED Lenser Briefcase is a bit more than what your father needs, consider the Auto LED. This flashlight provides a bright LED light, and is charged in your vehicle's cigarette lighter. With an Auto LED in the car, you know that your dad will always have light, no matter where their adventures take them.
For the fisherman, a knife such as the Angler exchange blade fishing set provides a sturdy set of blades that can be used with the same handle. The blades have a locking mechanism for safety and include a nylon pouch to keep all of the blades in one location. The Angler system includes blades for boning and filleting the fish your dad catches as well as a separate, serrated blade. Want to add a little something to this gift? Consider a Fishing Flex LED. These lights hook to the bill of your hat, the tackle box, or anywhere else you can think to clip it. The Fishing Flex LED is just the tool for bright and hands free lighting.
Because your dad undoubtedly taught you to be safe at some point growing up, he may appreciate an emergency lantern. The LED bulb in the Coast LED lenser lantern provides 80 hours of superior LED bright light, and an additional 200 hours of fading light, which gives dad ample time to replace the battery. The bulbs in the Coast LED Lenser last over 100,000 hours, so this is probably a one time gift. The lantern is free standing, and provides more and better quality light than from traditional propane lanterns. Once you introduce your dad to this, you may want one of your own. LED light is an excellent choice for all types of outdoor lighting, because of the clear and bright light, and the long lasting bulbs and batteries.
For the fisherman, a knife such as the Angler exchange blade fishing set provides a sturdy set of blades that can be used with the same handle. The blades have a locking mechanism for safety and include a nylon pouch to keep all of the blades in one location. The Angler system includes blades for boning and filleting the fish your dad catches as well as a separate, serrated blade. Want to add a little something to this gift? Consider a Fishing Flex LED. These lights hook to the bill of your hat, the tackle box, or anywhere else you can think to clip it. The Fishing Flex LED is just the tool for bright and hands free lighting.
Because your dad undoubtedly taught you to be safe at some point growing up, he may appreciate an emergency lantern. The LED bulb in the Coast LED lenser lantern provides 80 hours of superior LED bright light, and an additional 200 hours of fading light, which gives dad ample time to replace the battery. The bulbs in the Coast LED Lenser last over 100,000 hours, so this is probably a one time gift. The lantern is free standing, and provides more and better quality light than from traditional propane lanterns. Once you introduce your dad to this, you may want one of your own. LED light is an excellent choice for all types of outdoor lighting, because of the clear and bright light, and the long lasting bulbs and batteries.
Subscribe to:
Posts (Atom)